Bernina Record 830, Manual

Page: 124 / 212

124
Preparation
Hooping the Fabric
Centering
determine the center ► of the fabric to be embroidered
mark with a fabric marker or chalk ►
Using the Embroidery Hoop
loosen the screw(s) ►
remove the inner hoop ►
the arrows on both hoops must match ►
the arrows on the large and medium hoops and on the ►
Mega Hoop are at the center front, on the small hoop,
they are to the right side
Embroidery Template
there is an embroidery template for each hoop ►
the embroidery area is marked in 3/8" (1cm) squares ►
the center and end point holes of the center lines are ►
with holes for transferring marks to the fabric
place the template in the inner hoop, so the BERNINA
►
logo is at the front edge (by the arrows) and can be read
placed in this way, the template sits automatically in the
►
inner hoop
the finger hole or the template holder make it easier to
►
remove the template from the hoop
Hooping the fabric
place the fabric on the outer hoop; line up the marked ►
center point on the center of the template
place the fabric and inner hoop on the outer hoop
►
match the arrows of both hoops ►
fit hoops into each other; ensure that the fabric does not ►
move
hoop the material to be embroidered tightly, tighten the
►
screw
remove the template
►
AB
C