manualshive.com logo in svg

Bernina Record 830, Manual

Share
Download
Bernina Record 830 Manual Download Page 76

76

Personal Program

Selecting Stitch Pattern

touch the «Personal Program» icon

 

►

the screen appears with the four files

 

►

select the file where the stitch pattern is to be deleted, 

 

►

e.g. 1
touch the Stitch Altering Area (light blue)

 

►

touch the «Add» icon (as for programming)

 

►

the content of the file selected is shown 

 

►

select the stitch pattern to be deleted

 

►

the stitch pattern is deleted; all the remaining patterns 

 

►

are moved by one position
close the screen with 

 

►

 

Deleting Stitch Patterns

Special Screen

All alterations (stitch lengths, stitch widths, etc.) of the 

1 

stitch pattern selected are saved
All alterations of the stitch pattern selected are reset 

2 

to the original basic setting
Add a selected stitch pattern to your Personal 

3 

Program (with possible alterations)
The sewing computer sews continuously in reverse

4 

The stitch pattern is sewn in reverse, retracing the 

5 

previously sewn stitches by the stitch
Close the screen

6 

1

2

3

4

5

6

reverse

racing the 

Summary of Contents for Record 830





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands