EN
30
2 3 5
When inserting or removing the bobbin,
the needle must be fully raised.
-
Open the hinged cover (1).
- Remove the bobbin case by pulling its
latch towards you and pulling it out from
the hook.
- Hold the bobbin case with one hand. Insert
the bobbin so that the thread runs in a
clockwise direction (arrow) (2).
- Pull the thread through the slit and under
?
- Hold the bobbin case by the hinged latch
(4).
- Insert it into the hook (5). Make sure the
the top of the race.
Attention:
+ 6X$X
W EW 5
Inserting bobbin
