9
Setting up the machine
Changing the presser foot
· raise the needle and
presser foot
· turn power switch to 0
Attaching the presser foot
· guide the foot upwards
over the cone
· press the clamping lever
down
Raising the lever
· raise the clamping lever
· remove the presser foot
Removing the needle
· raise the needle
· turn power switch to “0”
· lower the presser foot
· loosen the needle clamp
· pull the needle down to remove
Inserting the needle
· loosen the needle clamp, if needed
· flat side of needle to the back
· insert the needle as far as it will go
· tighten the needle clamp
Changing the needle
Changing the presser foot
Refer to the safety
instructions!
Vertical spool pin
· the supplementary spool pin
(vertical) is stored in the accessory
box
· insert the pin from right to left in
the opening
· to remove, pull to the right at the
base of the spool pin
· essential sewing aid when using
more than one thread, i.e. double
needle, etc.
· threads wound onto spools in a
stacked manner work best when
feeding from a vertical spool pin
· using a vertical spool pin with
metallic threads will help avoid
fraying and splitting of the thread
Supplementary spool pin (vertical)
Refer to the safety
instructions!
bed_artista_180_engl_V3 7.10.2002 16:29 Uhr Seite 9
