66
Setup Program
Save and close
· Touch OK – close the screen
· Touch esc – close Setup
· Touch check in Layout 1 – close
embroidery hoop adjustment
Hoop adjustment
· hoop adjustment screen appears
· connect the embroidery module to
the machine
· attach the large hoop to the
embroidery module
· insert the embroidery template into
the hoop
· touch check – the machine reads
the hoop position; the needle
should be positioned exactly over
the center point of the template
· if it is not, adjust with the arrows
· it is only necessary to adjust the
hoop once – the same setting
changes will apply to all the hoops
Service Screen
· service screen appears
· select Adjustment of hoop
Setup menu
· press the external Setup button
· menu appears
· touch service
Embroidery hoop adjustment
This adjustment calibrates the needle
to the center of the embroidery hoop.
The hoop adjustment can only be
activated if the embroidery module is
attached
bed_artista_180_engl_V3 7.10.2002 16:30 Uhr Seite 66
