
Setting up the machine
6
Stores standard accessories
· enlarges the sewing
surface
· to open, lower the cover
to the front/back
Carrying case
· protects from dust and dirt
· compartment for accessories
Accessories
· foot control
· instruction manual
· power cable
· warranty card
· FHS presser foot lifter (Free Hand System)
· ruler for sewing table
· sewing table (attached)
· to remove the sewing table, lift slightly and remove.
To remove the case
· grasp both sides
· pull up vertically
Carrying case
Accessory box
To remove
· pull the box to the left to
work in free-arm mode
Note:
make sure the bobbin door
on the free arm is closed
before removing the box
To attach
·push the box to the right
until it engages
Standard accessories *
· four bobbins
· selection of 130/705H
needles
· seam ripper
· small screwdriver
· lint brush
· seam guide
· reverse pattern foot No.1C
· overlock foot No.2A
· buttonhole foot No.3C
· automatic buttonhole
foot No.3C
· zipper foot No.4
· blind stitch foot No.5
· open embroidery foot
No.20C
· sideways motion foot
No.40C
· height compensating tool
· vertical spool holder pin
· three spool discs
*can vary from country to
country
Important:
(USA/Canada only!) Use
only foot controller type
LV1/LV2 with sewing
machine models 170/180.
bed_artista_180_engl_V3 7.10.2002 16:29 Uhr Seite 6