28
Functions
Vertical mirror image
· touch symbol
· machine sews selected stitch in
vertical mirror image
· alteration of selected stitch is
shown on-screen
Pattern Extend 2–5x
· touch one or more times
· the numbers 2–5 appear
depending on the type of stitch
selected
· the length of selected stitch will be
increased by 2–5 times
· the stitch density is not affected
· lengthened stitches can be
programmed in memory
Balance
· touch symbol to open balance
screen
· correct forwards and reverse
stitches
· correct sideways motion stitches
Letter size
· touch one or more times
· one half of field is highlighted
· the gray section visually indicates
the letter size: large (9 mm) or
small (6 mm)
Monogram sizes
· appears in editing in place of Letter
Size function when a monogram is
selected
· when monograms are selected,
size 1 = 30 mm is automatically
activated
· touch symbol – the middle field is
activated (2 = 20 mm)
· touch symbol again – the right
field is activated (3 = 15 mm)
Buttonhole program functions
Buttonhole length – direct length
entry
· touch symbol to open number
screen
· enter button size (di
thickness) in mm
Application:
· use this method if you know the
size of your button
Buttonhole length – on screen measu-
rement
· touch symbol to open measuring
screen
· hold button to bottom lower left
corner of screen and use the stitch
width knob to measure it
· buttonhole length will be
programmed with 2 mm added
automatically
Application:
· simple method to determine
buttonhole size
Manual buttonhole
· touch symbol
· follow procedure (4–6 steps,
depending on buttonhole type)
Application:
· for individual manually sewn
buttonholes
· to repair existing buttonholes
Stitch counter buttonhole
· select buttonhole
· touch symbol
· stitch counter buttonhole will be
activated
The functions below appear on the function toolbar at
the lower edge of the screen when any buttonhole
(stitches 51–62) is selected.
bed_artista_180_engl_V3 7.10.2002 16:29 Uhr Seite 28
