Bernal G 501, User Manual

Page: 47 / 62

47
GB
Detailed information about the programmable func-
tions and parameters in the menu can be obtained from
the assembly and operating manual for the garage door
drive. For an appropriate cross-reference to the respecti-
ve chapter please look in the respective headline at the
top right.
Programming may only be performed by a professional
fitter.
The safety instructions given in the assembly and ope-
rating manual for the garage door drive should be obser-
ved for all changes made to the works settings.
The attached safety equipment is NOT EFFECTIVE du-
ring set up!
The automatic obstacle detection/force cut-off is NOT
EFFECTIVE during set up!
ANNEX A2
PROGRAMMING MANUAL G 501
TABLE OF CONTENTS
PROGRAMME POINT MENU PAGE
BUTTONS AND OPERATION OF THE MENU 02 + 03
OVERVIEW OF THE STRUCTURE OF THE MAIN MENU (LEVEL 1) 04
SETUP SETTING FORCE/DISTANCE (TRAVEL PATH AND FORCE CURVE) P 05
SETUP TRANSMITTERS PROGRAMMING A HAND TRANSMITTER C-1 06
SETUP TRANSMITTERS DELETE A HAND TRANSMITTER C-2 07
SETUP TRANSMITTERS DELETE ALL HAND TRANSMITTERS C-2 08
SETUP FORCE F 09
TIME TILL AUTOMATIC CLOSING A 10
WARNING TIME CAUTION LIGHT U 10
LIGHT AFTERGLOW TIME L 10
SPECIAL FUNCTIONS FUNCTION VENTILATION S-1 11
SPECIAL FUNCTIONS AUTO-CLOSING VENTILATION S-3 11
SPECIAL FUNCTIONS FUNCTION RELAY S-4 12
SPECIAL FUNCTIONS FUNCTION LIGHT S-5 12
DRIVE PARAMETERS REVERSION b-1 13
DRIVE PARAMETERS SOFT START / STOP b-2 13
DRIVE PARAMETERS AUTOMATIC CLOSING b-3 13
DRIVE PARAMETERS LIGHT BARRIER b-4 13
DRIVE PARAMETERS SAFETY EDGE b-5 13
DRIVE PARAMETERS FUNCTION CAUTION LIGHT b-6 13
DRIVE PARAMETERS SELECT CAUTION LIGHT b-7 13
DRIVE PARAMETERS RESET PARAMETERS (FACTORY SETTINGS) b-8 13
01