Bernal G 501, User Manual

Page: 18 / 62

18
GB
4.1 OVERVIEW OF THE CONTROL BOARD
START Yes Yes Terminal, max. 1.5 mm² Start/stop command see 4.2
NOT Yes Yes Terminal, max. 1.5 mm² Start/emergency stop command see 4.3
L+ Yes Yes Terminal, max. 1.5 mm² Photocell, VU (24 V/AC) see 4.5 - 4.6
L Yes Yes Terminal, max. 1.5 mm² Photocell see 4.5 - 4.6
LS Yes Yes Terminal, max. 1.5 mm² Photocell see 4.5 - 4.6
L- Yes Yes Terminal, max. 1.5 mm² Photocell, VU (0 V/AC) see 4.5 - 4.6
PK Yes Yes Terminal, max. 1.5 mm² Relay, closer, max. 250 VAC/1A see 4.7
┴
Yes Yes Terminal, max. 1.0 mm² Antenna cable, screen see 4.8
A Yes Yes Terminal, max. 1.0 mm² Antenna, inner conductor see 4.8
BT/WLAN Yes Yes 4P4C („RJ10“) Connection for Homewave Control Box see manual for the resp. accessory
HW-ERW Yes Yes 8P8C („RJ45“) Connection for hardware extension see manual for the resp. accessory
DISPLAY No Yes Display cable Connection for the display Equipment put on at the works
HALL Yes Yes Molex 4-pin RM2.54 Motor Hall sensor cable Equipment put on at the works
DEBUG/DOWNLOAD Yes Yes N.N. Manufacturer data interface Equipment put on at the works
DOWNLOAD RADIO Yes Yes N.N. Manufacturer data interface Equipment put on at the works
T Yes Yes Terminal, max. 1.0 mm² Transformer, primary „L“ 230 V/AC Equipment put on at the works
T Yes Yes Terminal, max. 1.0 mm² Transformer, primary „N“ Equipment put on at the works
N Yes Yes Terminal, max. 1.0 mm² Network, neutral conductor „N“ Equipment put on at the works
L Yes Yes Terminal, max. 1.0 mm² Network, phase „L“ 230 V/AC Equipment put on at the works
Earth Yes Yes Terminal, max. 1.0 mm² Network, Protective Earth Equipment put on at the works
Earth Yes Yes Blade terminal Protective earthing of the base plate Equipment put on at the works
24 V~ Yes Yes Terminal, max. 1.5 mm Transformer, secondary 24 V~ Equipment put on at the works
RT Yes Yes Blade terminal Motor cable red +24 V/DC Equipment put on at the works
GN Yes Yes Blade terminal Motor cable green 0 V/DC Equipment put on at the works
Multi-segment display Yes No Multi-segment display Menu and error displays see programming manual G 402
ON Yes No LED green Ready indications see programming manual G 402
F Yes No LED red Fault displays see programming manual G 402
MENU Yes No Print button „Open menu“ command
SCROLL Yes No Print button „Browse“ command
ENTER Yes No Print button „Confirm“ command
START Yes No Print button „Start“ command
LED1 Yes Yes LED white Integrated lighting
LED2 No Yes LED white Integrated lighting
LED3 No Yes LED white Integrated lighting
LED4 Yes Yes LED white Integrated lighting
DESIGNATION G 402 G 501 MODEL/TYPE DESCRIPTION REMARKS