Bernal G 501, User Manual

Page: 30 / 62

30
GB
Command START End position Door Open Closing¹ Reset hold open time to the beginning
End position Door Closed Opening¹ Opening
Opening (>Door Open) Stop None (opening is continued)
Opening (>Ventilation) Stop Stop
Closing Stop Stop - Opening – Hold open time...
End position Ventilation Opening¹ Opening¹
Command VENTILATION End position Door Open Closing¹ to the ventilation position Reset hold open time to the beginning
End position Door Closed Opening¹ to the ventilation position Opening¹ to the ventilation position
Opening (>Door Open) None (opening is continued) None (opening is continued)
Opening (>Ventilation) Stop (and after the renewed operating command Closing)
Closing Stop Stop - Opening – Hold open time...
End position Ventilation Closing¹ Closing¹
Triggering safety elements End position Door Open None (START is ignored) None (START/automatic closing was ignored)
(to terminals L...) End position Door Closed None (START is ignored) None (START/automatic closing was ignored)
Opening None (opening is continued) None (opening is continued)
Closing Stop – reversing Stop – reversing after Door Open
End position Ventilation None (START is ignored) None (START/automatic closing was ignored)
Triggering safety elements End position Door Open None (START was ignored) None (START/automatic closing was ignored)
(to terminals NOT) End position Door Closed None (START was ignored) None (START/automatic closing was ignored)
Opening None (opening is continued) None (opening is continued)
Closing Stop – reversing Stop – reversing after Door Open
End position Ventilation None (START was ignored) None (START/automatic closing was ignored)
Obstacle/force cut-off Opening Stop Stop
Closing Stop – reversing Stop – reversing after Door Open
Power supply re-established End position Door Open None None
(after a power failure...) End position Door Closed None None – automatic closing is NOT continued!
Opening Stop Stop
Closing Stop Stop
End position Ventilation None None – automatic closing is NOT continued!
Event... ...during the door status²... ...leads in operating mode ...leads in operating mode
Pulse repetition to: Automatic closing to:
9.4 OPERATING CONDITIONS
¹ possibly after a set prewarning time
² various door stati, explicitly „during the prewarning time“, are
not recorded here; the control unit generally returns here into
a safe status in order to avoid any unexpected functions if an
operating command was either triggered unintentionally or
also by a second user.
An example:
In the operating mode automatic closing and the end position
Door Open the hold open time has expired, the prewarning time
of the caution light is running: an operating command ventilati-
on or Start leads to a reset of the hold open time, which means:
the preset hold open time begins to run again.