Bernal G 501, User Manual

Page: 49 / 62

49
GB
03
End menu
If the desired setups are executed, the menu points can be used
to scroll to the menu point E of the first level (9). Confirming with
ENTER changes the device back into operational readiness.
The menu is always automatically ended 60 seconds
after the last operator action at every position with the
exception of when within SET-UP (menu P)!
NOTE:
On safety grounds the garage door drive will not accept any
commands while the menu is opened.
If the menu is opened during the hold open time then the gara-
ge door drive will only close the door after ending the menu on
the basis of a manual start command.
Only the level and the menu points are presented in the pro-
gramming manual which are required for execution of the desi-
red setup.
All levels of a menu or sub-menu are continuous; that means:
when one continues to scroll downwards at the lowest position
of a menu then the selection begins again at the uppermost
position of the level.