Berchtold OPERON B 810, Service Parts

Page: 58 / 120

OPERON B 810 SURGICAL TABLE
PRINCIPLES OF OPERATION
Rev. 1 70-000-0027
4-24
Base, Column, and Top Electrical
Connections The figures listed in TABLE 4-8 identify the
locations of the electrical connections in the base, on
the column, and in the top of the table.
TABLE 4-8 BASE ELECTRICAL CONNECTIONS LOCATIONS
Figure
Identification Connection Identification General Location in Base
FIGURE 4-38 DC fuse and breaker Connections Behind DC power center
FIGURE 4-39 Battery and DC pump Fuse; AC mains ground Head end
FIGURE 4-40 Auxiliary hand pendant connector Head end between batteries
FIGURE 4-41 Base to CPU in-line fuse, Base to CPU in-line fuse, AC Signal
lamp power line, AC / DC power terminals Head end right side of
column
FIGURE 4-42 Terminal strip for AC Power Center and Transformer
connection; AC Power Center connections for AC Mains,
Battery signal, and batter charger Foot right
FIGURE 4-43 Floor lock manifold wiring connections Foot left
FIGURE 4-44 Table top motor and sensor connections, including ground
attachment. Top of column under seat
section
FIGURE 4-45 Column ground, hydraulic motor, and kidney switch
connections Head side of column
FIGURE 4-46 Leg and back position sensors Left side of column
DC Breaker Terminals
(20 Amp Fuse F3 in Drawer)
Power Supply Connector
Spare Fuse (20 Amp Fuse)
J10-2 Connection to Harness K6
(20 Amp Fuse F4 in Drawer)
ON/OFF Switch
(20 Amp Circuit Breaker)
FIGURE 4-38. WIRING CONNECTIONS AT THE BACK OF THE DC POWER CENTER