Preparing for installation
23
¾
Loosen the lower cover's two screws (1) using a
standard screwdriver.
¾
Carefully fold the cover open approx. 45°.
¾
Pull the connector, together with the connection
cable, to the right from the control electronics.
The connector for the lighting is located above this
connector.
¾
Pull the connector, together with the connection
cable, to the right from the LED strip.
¾
Fold the cover open completely.
¾
Set DIP switch 1 using a pointed object (e.g.
small screwdriver).
DIP
switch 1
Function
"OFF"
position
(standard
setting)
Sound is switched off.
"ON"
position
Sound is switched on.
