Installing the device
45
¾
Fold the upper grease tray closed.
¾
Install the four screws.
Installing the dirt strips
¾
Insert the dirt strips back into the extractor hood.
¾
Make sure that the dirt strips are seated correctly
on the securing magnets.
Inserting the fluff screen
¾
Insert the fluff screen back into the extractor hood.
¾
Make sure that the fluff screen is seated correctly
on the securing magnet.
¾
Close the lower front flap.
Installing the rotary knob
The rotary knob must be placed onto an axle. This
round axle is milled at one edge. The rotary knob
can therefore only be placed onto the axle in one
position.
¾
Make sure that the installation position is correct.