43
Video
NTSC/ PAL/ SECAM
Contrast: Preset
Brightness: Preset
VG828 Test pattern
YPbPr
NTSC (480i)/ 480p/ PAL
(576i)/ 576p, HDTV (720p/
1080)
Contrast: Preset
Brightness: Preset
VG828 Test pattern
S-Video
NTSC/ PAL/ SECAM
Contrast: Preset
Brightness: Preset
VG828 Test pattern
HDMI
NTSC (480i)/ 480p/ PAL
(576i)/ 576p, HDTV (720p/
1080); PC Compatible
640X480
1920X1080(16 :9),
Composite-Sync
Contrast: Preset
Brightness: Preset
VG828 Test pattern
4. Power Consumption:
Power consumption
Max.
645W
Standby
0.5W Max. at 100 ~ 240VAC
(disable loop through, Lan function)
3W MAX at 230VAC 50HZ for network mode
Normal
Typical 610W @110Vac
ECO
Typical 564W@110Vac
ECO Blank
Same as Eco Mode
5.
OPERATIONAL INSPECTION CRITERIA:
No
Description
Class
1
Noise
1.1
When power on or power off, fan or color wheel get abnormal noise.
Major
1.2
When normal operation, noise exceed noise level (refer to Q201 document)
Major
2
Display Quality (include input: Video, S-video, YPbPr, HDMI, and D-sub or RGB)
2.1
Focus range out of specification
Major
2.2
Focus fail (focus not clear or flare/ defocus/ lateral color out of specification)
Major
2.3
Brightness & Uniformity --- out of specification.
Major
2.4
Contrast ratio --- out of specification
Major
2.5
Color coordinates --- out of specification.
Major
2.6
Light leakage out of specification (active area or out of active area)
Major
2.7
Throw ratio out of specification
Major
2.8
Room ratio out of specification
Major
2.9
Picture distortion out of specification
Major
2.10 DMD image out of specification
Major
2.11 Picture dust or other image quality out of specification
Major
2.12 Gray stage check --- Missing stage
Major
2.13 Video noise --- If video noise presented
Major
2.14 DDC data error / incorrect
Major
2.15 Mode detection error
Major
2.16 OSD Malfunction
Major
3
Audio Quality
3.1
Audio malfunction
Major
3.2
Speaker no function
Major
3.4
Volume mute malfunction
Major
4
Remote control malfunction
Major
Summary of Contents for SX930
