![background image](http://html.mh-extra.com/html/benq/sx930/sx930_service-manual_2735009147.webp)
147
Appendix 2 -
Code List: IR / RS232 / DDC Data
Remote Control Code:
1.
IR Code
(projector must support 0x02,0X4E,0X4F power on/off command)
Key Function
Description
Code
Suppor
t
ID and Protocol
1
Wireless
0x00
No
Frequency 38 KHz
2
Power
This button will on/off the projector.
0x02
No
Protocol
NEC Format
3
Freeze
This button will freeze/ unfreeze the
image.
0x03
Yes
Custom
Code
0x0030
4
Source
This button will show available source
options.
0x04
Yes
5
Page Up
By pressing “Page Up” button, could
enable Page Up function.
0x05
No
6
Page Down
By pressing “Page Down” button, could
enable Page Down function.
0x06
No
7
Eco Blank
This button will turn projector into/out
of blank mode.
0x07
Yes
8
Auto
This button will automatically adjust
projector’s picture quality.
0x08
Yes
9
Ke
0x09
No
10
Keystone -
0x0A
No
11
Up
When there is no OSD on screen, this
button will correct optical keystone in
negative direction.
When there is OSD menu on screen, this
button will move the chooser item to
the upper one.
0x0B
Yes
12
Down
When there is no OSD on screen, this
button will correct optical keystone in
positive direction.
When there is OSD menu on the screen,
this button will move the chooser item
to the next one.
0x0C
Yes
13
Left
When there is no OSD on screen, this
button will correct optical keystone in
positive direction.
When there is OSD menu on screen, this
button will move the chooser item to
the left one.
0x0D
Yes
14
Right
When there is no OSD on screen, this
button will correct optical keystone in
positive direction.
When there is OSD menu on screen,
This button will move the chooser item
to the right one.
0x0E
Yes
15
Menu/Exit
This button will turn on/off OSD menu.
0x0F
Yes
16
Mode
When there is no OSD menu on the
screen, the button will change picture
mode.
When there is OSD menu on the screen,
this button will excite the item chooser.
0x10
Yes
17
Contrast
Displays the CONTRAST setting bar.
0x11
Yes
18
SWAP
0x12
No
19
Aspect
Select the display aspect ratios.
0x13
Yes
Summary of Contents for SX930
