BenQ SX930, Service Manual

Page: 39 / 175

39
TABLE 2 :(General Product of plastic outlook inspection standard)
NO Appearance Spec
1 缩水
Shrinkage
A
区
:
不可有缩水
,
以带手套检验
,
手摸过去不可有凹
陷的感觉
A region: No Shrink. With gloves, no feeling of sink when touching the
surface
B / C
区
:
不能明显看出
B/C region: not obvious
2 流痕
,
咬花
,
光泽
Run, Texture, Gloss
不能有明显的深浅不均
No obvious non-uniformity
3 接合线
Welding Line/Knit Line
用指甲划过不会有停顿感
,
并附近无明显之光泽差异
When scratching on it, there’s no feeling of obstruction. Also, there
should not be obvious difference in gloss nearby it.
4 顶白
Ejector Mark
不可
Reject
5 Label/screws shortage 不允许
Reject
6 缺料
Material shortage
缺料不可影响机构强度和表面
Material shortage is not allowed to impact structure strength and
surface
7 色差
Chromatic aberration
喷漆
(Painting):
Δ
E<=2; L<=1.5 ;
Δ
A,B <= 0.6
银粉漆
(Paint, aluminum).
Δ E<=2 L<=1.0; Δ A, B <= 0.6
非银粉漆
(Paint, non-aluminum)
素材
(Raw material) : Δ L,A,B<=0.6 , Δ E<=0.75
8 印刷
Printing
文字印刷不得有漏印、断线、重影、组细不均、溢墨、印偏
( 1mm )
、
印斜
(
歪斜＜
0.3 mm )
。
Printing must not have incomplete printing, break off, overlap,
uneven thickness, excessive ink, printing misalignment (1mm),
printing slanting & crooked (<0.3mm)
文字印刷颜色须确认是否正确 。
Printing color must be comparable to color chip and sample.
9 Logo of panel sticker
文字印刷不得有漏印
.
断线
.
重影
.
组细不均
.
溢墨
.
印偏
( 1mm)
印斜
(
歪斜 ＜
0.5 mm).
Printing must not have incomplete printing, break off, overlap, uneven
thickness, excessive ink, printing misalignment (1mm), printing slanting
& crooked (<0.5mm)
文字印刷颜色须确认是否正确
.
Printing color must be comparable to color chip and sample.
10 刮伤
Scratch/Nicks
Side A:
(W < 0.1mm , L < 3mm):
容许
1
个
Only 1 this kind of scratch is accepted
W < 0.1mm , L < 3-5mm
容许
0
个
No this kind of scratch is accepted
Side B:
W < 0.15mm , L < 3mm
容许
2
个
Only less than 2 this kind of scratch is accepted
W < 0.15mm , L < 3-5mm
容许
1
个
Only 1 this kind of scratch is accepted