BenQ SX930, Service Manual

Page: 10 / 175

10
not included. (Except DMD Defect)
3.13 Light Leakage out of AA
≦
1 lux, @ full black pattern with 60”~80“
≦
3 lux, @ out of full black pattern with diagonal 80~120”
≦
20 lux, @ out of full black pattern with diagonal >120”
(Except DMD Defect and high zoom ex: D zoom /zoom5 /
B zoom )
3.14 Ghost Ghost (Confirm at EVT2 stage)
3.15 Defect
(Color Band, Dark Corner,
Dark band)
Follow limited sample (When needed).
3.16 Preset mode setting
4.Lamp Specification
4.1 Lamp USHIO NSH465W E22.7
4.2 Lamp Sync Type AC Lamp
4.3 Lamp Flick Follow limited sample (When needed).
4.4 Lamp Power
Normal Mode 440W -> 425W
ECO Mode 360W
Image-care or equivalent NA
5. Mechanical Specification
5.1 Color & Texture specifications Refer to ID document for details
5.2 Physical Dimensions(Width X
Depth X Height)
446*336*152(mm)
5.3 Net Weight
≦
8.5kg
5.4 Security Slot Kensington compatible slot 20Kg break away force
5.5 Lens Cover Detached lens cover
5.6 Adjustment Feet
Adjustable foot in front, rubber foot in rear.
Front/ Rear foot
Tilt: 0-4.5
∘
,
Right/Left: +4.0
∘
/-4.0
∘
5.7 Ceiling Mounting
Match BenQ’s ceiling mount required.
Use the same mounting as current shipping projectors.
5.8 Screws
All color of screws should similar with the plastic color which
close it.
5.9 During PVT stage, limited sample
of color and texture should be
approved by BenQ industrial
designer and mechanical
engineer.
N/A
5.10 Packaging
Cushion Material EPE
6. Thermal Specification
Mechanical component temperature at ambience 0~40
℃
6.1 Surface held or touched for short
periods
Normal surface:
Metal< 60
℃
Plastic< 85
℃
Bottom surface @25
℃
Metal< 55
℃
Plastic< 70
℃
6.2 Surface which my be touched
Metal Plastic
< 70
℃
< 95
℃
6.3 Exhaust Air < 95
℃
6.4 Audible Noise Level Typical
Normal mode: 39dBA @ 25°C(table center)
Eco mode: 36dBA @ 25°C(table center)