BenQ SX930, Service Manual

Page: 169 / 175

169
20 ~ 200 0.0185
Duration : 5 Minutes
Axis : 3 axis ( Horizontal and Vertical axis ,Z axis)
Duration: 5 minutes per orientation, totally 15 minutes.
Un-package Shock
(Non-operating) Waveform: Half sine
Faces: 6 sides/per orientation, 3 shocks
Duration: < 20 ms
Velocity accelerate: 50 G
Bench Drop 1. Pivot, 90 degree, sitting on right and left side, 1 drop per
orientation, total of 2 drops.
2. Bottom and opposite, 1 drop per orientation, drop height 5 cm,
totally 2 drops.
Security Lock 20kg break away force
B2.2 Atmospherics Test
Temperature/Humidity,
(Operating)
Test condition: 0
℃
~ 40
℃
, 10%~90%, no condensation
Test procedure:
25
℃
/90%, 2hrs
→
40
℃
/90%, 6hrs
→
0
℃
, 6hrs
→
40
℃
/10%, 6hrs
→
25
℃
/90%, 2hrs; (2 Cycles)
Storage High Temperature /
Humidity
(Non-operating, with package) Test condition: (-20°C ~ 60°C, 10% ~ 90% R.H.)
1. Storage high temperature / humidity exposure test:
25
℃
/60%, 1hrs
→
60
℃
/90%, 48hrs
→
25
℃
/60%, 1hrs
2. Storage transportation test:
25
℃
/60%, 1hrs
→
-20
℃
, 24hrs
→
25
℃
/60%, 1hrs
→
60
℃
/90%, 24hrs
→
25
℃
/60%, 1 hrs
Criteria Inspection:
1. The products should be operated normally at specified lower and
higher temperature environment.
2. The carton no crash and broken issue.
Altitude Operating:
Without high altitude mode 0°C~35°C @ 0~1499m above sea level
With high altitude mode 0°C~30°C @ 1500~3000m above sea level
Non-operating:
30
℃
@0~12,200m above sea level
Start
Turn On @ 0
℃
and 40
℃
, AC90~264V, 47~63Hz
B2.3 Regulatory
EMC Test condition:
FCC part 15B class B, EN55022 class B
ESD Follow IEC 61000-4-2 and EN55024 regulation
1. Input Voltage / Frequency : 110V AC / 60Hz
2. Timing Mode : 48K/72Hz, Full White Pattern
ESD : Air Air discharge to set surface: ±15KV No Damage
ESD : Contact Contact discharge to set surface and metal:
±8KV No Damage
Contact discharge to Vert./Horiztl coupling
plane: ±8KV No Damage
Contact discharge to D-sub/S-video input pins:
±4KV No Error
Contact discharge to HDMI input pins: ±2KV No Error
Surge 1KV line to line, 2KV line to ground on input power lines.
Safety Please refer to IEC/EN/UL 60950-1 for details.