![background image](http://html.mh-extra.com/html/benq/sx930/sx930_service-manual_2735009006.webp)
6
2.4 Safety Notice
1
Make sure your working environment is dry and clean, and meets all government safety
requirements.
2
Ensure that other persons are safe while you are servicing the product.
3
DO NOT perform any action that may cause a hazard to the customer or make the product
unsafe.
4
Use proper safety devices to ensure your personal safety.
5
Always use approved tools and test equipment for servicing.
6
Never assume the product’s power is disconnected from the mains power supply. Check that it
is disconnected before opening the product’s cabinet.
7
Modules containing electrical components are sensitive to electrostatic discharge (ESD). Follow
ESD safety procedures while handling these parts.
8
Some products contain more than one battery. Do not disassemble any battery, or expose it to
high temperatures such as throwing into fire or it may explode.
9
Refer to government requirements for battery recycling or disposal.
2.5 Compliance Statement
Caution: This Optical Storage Product contains a Laser device. Refer to the product specifications
and your local Laser Safety Compliance Requirements.
2.6 General Descriptions
This Service Manual contains general information. There are 2 levels of service:
Level 1: Cosmetic / Appearance / Alignment Service
Level 2: Circuit Board or Standard Parts Replacement
2.7 Related Service Information
Service Web Site
eSupport Website:
BenQer:
http://esupport.benq.com/v2
ASP:
http://esupport.benq.com/
Summary of Contents for SX930
