Bender UNIMET 1000ST, Operating Manual

Page: 73 / 100

Testing and measuring
73 TGH1256en/10.2005
5.5.2 How to start a test from the device catalogue
The required ID number is already selected.
Start the test and follow the instructions on the UNIMET® 1100ST display (see also “Test” on
page 62ff). Once the test is complete, save the result to the device catalogue again. The old
test results will be replaced by the new ones.
5.6 Single test
Test steps can be called up in the form of single tests and repeated as often as required. If,
for example, a limiting value is not met during a classified test sequence, the test step
concerned can be examined in more detail using a single test.
5.6.1 How to access the “single test”
In the main menu, select “F1: Single test”. Use the arrow keys to select the type of test
required. Double arrows can be used to scroll page by page. Once you have made your
selection, activate the entry by pressing the Enter key.
Modify master data (master data can also be modified once the test
has been completed).
ENTER key Starts the test
i