
Operation and setting
26
4.5.3.3
Unimet standard protocol
[-> Main menu -> F5: System administration -> F2: Interfaces -> F3: Unimet standard protocol]
The UNIMET® 1100ST can be controlled remotely via the RS-232 interface using PC software.
Select “Unimet standard protocol” to switch the UNIMET® 1100ST to remote control mode.
In this operating mode, data can be transferred or UNIMET® 1100ST actions initiated.
On some software products it is sufficient for the UNIMET® 1100ST to appear in the main
menu. In such cases, Unimet remote mode can then be called via the PC software.
Following logon and every time the UNIMET® 1100ST is started up, the ST6180
barcode reading wand will need about 20 seconds before it is ready for
operation. The red LED in the tip of the reading wand will flash to indicate
readiness for operation.
If you are using the RS-232/1 interface, select setting “F1: Barcode scanner RS-
232/1” on all versions of UNIMET® 1100ST and on UNIMET® 1000ST.
If a barcode scanner has been logged on, it will not be possible to transfer data
via the RS-232 interface. This affects both the transfer of test data and the
running of software updates.
Summary of Contents for UNIMET 1000ST
