Bender UNIMET 1000ST, Operating Manual

Page: 69 / 100

Testing and measuring
69 TGH1256en/10.2005
5.3.5.2 Editing and saving
For our example, we are selecting “F4: Edit type and ID”. You can also access the following
functions via this menu:
5.3.5.3 Entering the ID number
The device ID is required for saving to the device catalogue.
1. Using the arrow keys, scroll to the "ID number" entry and enter an ID number. Other data such as
serial number, building, room, department, test costs and a comment can also be entered.
2. Exit the master data screen by pressing .
F1 Save in type catalogue. We do not need this function for our example, as the
type has already been saved.
F2 Save in device catalogue. Enter the ID number as previously with “F4: Edit
type and ID”.
F3 Do not save changes. The entries and changes are rejected following the
appearance of a safety prompt.
F4 Back to master data screen. The master data can be edited and the test can be
started.
F5 The test result (if there is one) and sequence of test steps are displayed.
Exit menu. The entries and changes are rejected following the appearance of
a safety prompt. <<
<<