Bender LANTRAXX CMS460-D, Manual

Page: 50 / 88

Operation
50 CMS460-D_D00045_01_M_XXEN/07.2016
 
If the PRESET routine determines a value that exceeds the maximum
response value (the highest possible response value is set).
To prevent unwanted execution of this function, the entry must be confirmed
once more.
6.4.6.3 Settings menu 3: Channel
You make the measuring channel settings in this menu (either individually or
for all channels (1…12) simultaneously). Selecting a measuring channel:
1. Use the "

" button to select the measuring channel. Press the "
↵
" but-
ton.
2. Use the Up/Down buttons to select a single measuring channel (e.g. 1)
or all measuring channels (1…12). Press the "
↵
" button to confirm your
selection.
If the measuring channel settings differ only slightly, the
following procedure is recommended:
- first set all the measuring channels (1…12) to the same
value
- then modify the settings of an individual measuring
channel
Chan.: 1
Exit
1.Factor: *1
2.Resp. val..:16.0A
Setting an
individual channel:
Chan.: 1..12
Exit
1.Factor: *1
2.Resp. val..:16.0A Setting
all channels: