Bender LANTRAXX CMS460-D, Manual

Page: 57 / 88

Operation
57 CMS460-D_D00045_01_M_XXEN/07.2016
2.Alarm
on Relay switches in the event of an alarm.
off Relay does not switch in the event of an alarm.
3.Prewarning
on Relay switches in the event of a prewarning.
off Relay does not switch in the event of a prewarning.
4.Device error
on Relay switches in the event of a device error
off Relay does not switch in the event of a device error.
5.Ext. Alarm
on Relay switches in the event of an external alarm*
off Relay does not switch in the event of an external alarm*
* Alarm on an external device the address of which is set to "on" in the "Alarm
addresses" menu (see „Settings menu 9: Alarm addresses“, page 59).
6.4.6.5 Settings menu 5: History
Here the history memory can be deleted completely. Use the "
↵
" button to
confirm that the memory is to be deleted.
6.4.6.6 Settings menu 6: Data logger
You make the settings for the data logger recording of the measured values
for each measuring channel in this menu.
Select a measuring channel:
1. Use the arrow button "

" to set the measuring channel. Press the "
↵
"
button.
2. Use the Up/Down buttons to select a single measuring channel or all
measuring channels (1…12). Press the "
↵
" button to confirm your
selection.