manualshive.com logo in svg

Bender LANTRAXX CMS460-D, Manual

Share
Download
Bender LANTRAXX CMS460-D Manual Download Page 64

Operation

64

CMS460-D_D00045_01_M_XXEN/07.2016

6.4.8

Menu 8: External devices

This menu can be used for setting and operating external devices connected via 
the BMS bus to this CMS460-D. In this way, for example, RCMS460-L or other 
CMS460-devices can be set. The menu options of the external devices available 
via this function are indicated in the CMS460-D display. Settings modified at the 
external device are automatically stored in the external device. 
After calling up this menu, the address and type of devices already stored will 
be displayed. The display is updated every five minutes. 

Use the Up/Down buttons to select the address of the external device and 
confirm with the "

↵

" button.

The device is being searched: 

External devices connected to the BMS bus or switched on for
the first time will not be displayed immediately by the
CMS460-D in the external devices list. The list will be updated
only after a few minutes.  However, it is not necessary for the
list to appear in order to select and set the external device,
which can be achieved via the address. 

  Exit 
1.CMS460-D 
2.RCMS460-L
3. --

3: --

Summary of Contents for LANTRAXX CMS460-D

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands