Bender ATICS Series, Manual

Page: 93 / 104

ATICS-DIO_D00080_03_M_XXEN / 04.2021 93
ATICS-…-DIO
Removing the ATICS® in case of DIN rail mounting
Undo screws (D).
Remove lower and upper terminal covers (A) by using a screw-
driver to push back the locking hook (B) located approximately in
the middle of the cover in each case.
ATICS-2-DIO
: Use a screwdriver to pull the lower yellow slide lock
(C) downwards and raise the ATICS® slightly from below.
ATICS-4-DIO : Remove lower green plug connector. Use a screw-
driver to pull the two lower yellow slide lock (C) downwards and
lift ATICS® slightly from below.
ATICS-2-DIO : Now use the screwdriver to pull the upper yellow
slide lock (D) upwards and remove the ATICS®.
ATICS-4-DIO
: Now use a screwdriver to pull the two upper yellow
slide locks (C) upwards and remove ATICS®.
B
A
B
N
N N N N
D
C
N
D