Bender ATICS Series, Manual

Page: 11 / 104

ATICS-DIO_D00080_03_M_XXEN / 04.2021 11
ATICS-…-DIO
2 Intended use
Transfer switching devices are used everywhere there is dependence on high availability from the pow-
er supply. The ATICS® automatic transfer switching device is intended for the application described in
the chapter „System description“ on p. 13. When the preferred supply fails, the ATICS® automatically
switches to the second supply.
Areas of application:
• Group 1 and 2 medical locations according to DIN VDE 0100-710 and
IEC 60364-7-710.
• Hospital main distribution boards (DIN VDE 0100-710)
• Locations open to the public (DIN VDE 0100-718)
• Emergency power supplies
• Heating, air conditioning, ventilation, cooling
• EDP, data centres
• Fire extinguisher and sprinkler systems
Several versions of the ATICS® are available. They differ for example by switching over from two- or
four-pole systems or by the load current (see „ATICS® tasks“ on p. 15). Please heed the limits of the
range of application indicated in the technical data.
In order to meet the requirements of applicable standards, customised parameter settings must be
made on the equipment in order to adapt it to local equipment and operating conditions.
Intended use includes following all the instructions in the operating manual and complying with the
test intervals.
Any use other than that described in this manual is regarded as improper.