Bempu ApneBoot, Operation Manual, Page: 37 / 48

37 www.bempu.com
decreased immunity of the device.
4.6 Guidance and manufacturer’s declaration – electro-
magnetic immunity
These devices are intended for use in the electromagnetic environment
specified below. The customer or the user of the device should assure that
the device is used in such an environment.
Immunity IEC Compliance Elec tromagnetic
Test 60601-1-2 level environment—
test level guidance
Electro- ±6 kV ±6 kV Floors should be wood,
static contact contact concrete or ceramic tile.
discharge ±8 kV air ±8 kV air If floors are covered
(ESD) with synthetic material,
IEC the relative humidity
61000-4-2 should be at least 30%.
Electrical ±2 kV ±2 kV Mains power quality
fast for power for power should be that of a
transient/ supply supply typical commercial or
burst lines lines hospital environment.
IEC ±1 kV ±1 kV
61000-4-4 for input/ for input/
output output
lines lines
Surge ±1 kV ±1 kV Mains power quality
IEC line(s) to line(s) to should be that of a
61000-4-5 line(s) line(s) typical commercial or
±2 kV ±2 kV hospital environment.
line(s) to line(s) to
earth earth
Voltage <5% UT <5% UT Mains power quality
dips, short (>95% dip (>95% dip should be that of a
interrup- in UT) in UT) typical commercial or
tions and for 0.5 for 0.5 hospital environment.
voltage cycle cycle If the user of the device
variations 40% UT 40% UT requires continued operation