Bempu ApneBoot, Operation Manual, Page: 23 / 48

23 www.bempu.com
(c) Once the main unit is switched off, the duration will be reset to zero and
the data will start recording from zero.
2. Events: This displays the number of apneic events, indicated by bradycar -
dia and/or oxygen desaturation, in the duration displayed above it.
3. Last Event: This displays the time in hh:mm format, that when did the last
bradycardia and/or oxygen desaturation event occur from the moment the
history button was pressed.
3.4 Alarms and Indications
C
ondition Indication
Start-up Indication Display: Screen turns ON
(When Power button with ‘BEMPU’ logo
is activated.) LED’s: Alarm LED blinks
Red
Audio: Audio alarm beeps
Stimulator boot vibrates for 1
cycle which includes three
sequential vibrations
Pulse Oximeter probe not Display: Screen shows
connected. the message ‘Probe not
(When the Pulse Oximeter Probe Connected’
is not connected to the main unit) LED’s: No LED
Audio: No audio alarm
Stimulator not connected. Display: Screen shows
(When the Stimulator boot the message ‘Stimulator
is not connected to the main unit) not found’
LED’s: No LED
Audio: No audio alarm
Probe not connected to Display: Screen shows
the infant. the message ‘Probe Off
(When pulse oximeter probe is Patient’
connected to the main unit, LED’s: No LED
but is not placed properly on Audio: Audio alarm beeps
the infant)