Bempu ApneBoot, Operation Manual, Page: 11 / 48

11 www.bempu.com
2. DEVICE SETUP
This section contains step-by-step instructions on setting up and operating
the ApneBoot. It is advisable to go through this section in detail before using
the device. In case of any questions or concerns clarify with a BEMPU repre
-
sentative before operating the device.
2.1 Unpacking and Inspection
This product must be checked before use. A defective product should not be
used. Parts that are broken, missing, distorted, or contaminated should be
replaced immediately. When such repair or replacement becomes necessary,
BEMPU recommends that a telephone request for service advice to be made
to BEMPU Health Pvt. Ltd. on the given Customer Support number (1800-
425-0192).
Before operating the ApneBoot check for the following and do not use if
there are any signs of damage as described below:
a) Packaging is damaged
b) Device or any of the accessories are physically damaged
c) Any of the described box contents are missing
The ApneBoot product purchase contains the following:
ApneBoot Main Unit 01
Pulse Oximeter Probe 01
Patient Extension Cable 01
Stimulator Boot 01
AC Power Cord 01
Instruction Manual 01
2.2 Setup
Step 1: Place the device on a flat, horizontal and dry surface.
Caution: Make sure nothing is stacked up or placed above the main unit
blocking the speaker.
Note: Make sure that the device is placed in a manner to be easily visible and
readable.