DDT-320-000 Rev G Belmont Medical Technologies
Page
106
of
114
To set the time of the cursor:
1. Use the keyboard to set the required time in the
Cursor
textbox. Make
sure to select the time as displayed on the graph (and in the HH:MM
format).
2. Press ENTER.
The cursor moves to the selected time spot and the Temperatures displayed
are the temperatures of the new spot.
To move the cursor line, in time (X direction)
1. Click the Cursor
icon.
2. Bring the + to the cursor location, the + will convert to a double line
3. Use the mouse to move the double line to a new cursor location.
NOTE:
The values of the temperature at the cursor location appear in the
window adjacent to the curve color window
Modes and Error Area
This area provides the following information:
System mode
marked by letters (See Mode Codes Table) and a vertical line.
Rewarming
steps between 0º
C
and 0.5º
C shown in the example in pink
(the step was first 0.4ºC and then changed to 0.2ºC).
Error
: Period with no control,
in the example due to system
pause (yellow markings).
