7 0
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA
JANUARY 2003
“L W/S HOT”
This caution appears when the left over
temperature sensor detects an overheat
( 5 4 . 5 ° C / 1 3 0 ° F ) c o n d i t i o n i n t h e l e f t
w i n d s h i e l d h e a t e r c i r c u i t . T h i s c a u t i o n
appears only into the W/C/A window.
“OVSPD” (Np engine 1)
This caution appears when an internal fault
within the IIDS has been detected by the
continuous BIT. This caution appears only
into the W/C/A window.
“IIDS”
T h i s c a u t i o n a p p e a r s w h e n a n N g
overspeed has been detected by the engine
2 FADEC/ECU Ng > 106%. This caution
appears above the engine 2 Ng digital
readout.
“OVSPD” (Ng engine 2)
“R W/S HOT”
“OVSPD” (Ng engine 1)
This caution appears when the right over
temperature sensor detects an overheat
( 5 4 . 5 ° C / 1 3 0 ° F ) c o n d i t i o n i n t h e r i g h t
w i n d s h i e l d h e a t e r c i r c u i t . T h i s c a u t i o n
appears only into the W/C/A window
T h i s c a u t i o n a p p e a r s w h e n a n N g
overspeed has been detected by the engine
1 FADEC/ECU Ng > 106%. This caution
appears above the engine 1 Ng digital
readout.
“PARK BRK”
This caution appears when the parking
brake is on. This caution appears only in
the W/C/A window.
This white advisory appears when the float
system is armed after pressing the float
a r m p u s h - b u t t o n s w i t c h o n t h e c e n t e r
pedestal. This advisory appears only into
the W/C/A window.
“FLTS ARM”
T h i s c a u t i o n a p p e a r s w h e n a n N p
overspeed has been detected by the engine
1 FADEC/ECU Np > 115%. This caution
appears above the engine 1 Np digital
readout.
“C/HK ARM”
This white advisory appears when the cargo
hook system is armed after pressing the
cargo hook switch to the armed position.
This advisory appears only into the W/C/
A window.
“OVSPD” (Np engine 2)
T h i s c a u t i o n a p p e a r s w h e n a n N p
overspeed has been detected by the engine
2 FADEC/ECU Ng > 115%. This caution
appears above the engine 2 Np digital
readout.
Summary of Contents for BELL 430
Page 1: ...Product Data ...