2 5
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA
JANUARY 2003
A center pedestal between the two cockpit seats contains the pilots' ICS control panel,
pilot and left seat ICS / radio foot switch selectors, and gyrocompass control switch.
The remaining space is available for optional equipment.
PILOT CYCLIC TRANSMIT SWITCH
FLOOR TRANSMIT SWITCH
The standard instrument panel is equipped with the basic VFR flight instruments with
ample space to add a wide selection of options. Visibility forward and to the side is
excellent due to the panel's low, compact design. The standard VHF-AM communications
system (VHF comm No.1) is a King KTR-908 lightweight airborne radio. It provides
two-way amplitude-modulated voice communications within the frequency range of
118.000 MHz to 135.975 MHz. The radio's control head is located on the upper center
section of the instrument panel. The remote mounted transceiver unit is located in the
nose avionics compartment and the antenna is on the aircraft belly. The transmit function
is controlled by a switch on the cyclic stick and the floor mounted foot switch.
COCKPIT FEATURES
VHF COMM 1 CONTROL HEAD
PILOTS INSTRUMENTS [STANDARD
ELECTROMECHANICAL]
Summary of Contents for BELL 430
Page 1: ...Product Data ...
