5 5
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA
JANUARY 2003
START PAGE
FUEL QUANTITY DISPLAY
The fuel quantity display presents left and
right fuel system quantity as individual
vertical scales with a digital total fuel
q u a n t i t y i n b e t w e e n . A d v i s o r y t e x t
indications show low fuel pressure, fuel
valve position, fuel filter bypass, and low
fuel warning. The fuel quantity scales are
normally BLUE, with the last 90±10 pounds
s h o w n R E D . I f t h e o p t i o n a l f u e l f l o w
indicating system is installed the left and
right fuel flow digital indications will appear
o n o u t b o a r d s i d e s o f t h e f u e l q u a n t i t y
display.
CLOCK
The clock is a digital display in the lower
right corner of the IIDS secondary screen,
p a g e 1 . T h e c l o c k i s c o n t r o l l e d b y t w o
c o n t r o l b u t t o n s u n d e r t h e s c r e e n . A n
auxiliary rechargeable battery pack [dual,
9 Volt DC nickel-cadmium type] provides
electrical power to keep the clock function
active [but not displayed] whenever normal
28 Volt DC is not available to the IIDS. The
battery pack is recharged anytime normal
electrical power is applied to the airframe.
The clock modes are as follows:
•Greenwich Mean Time (GMT) in 24 hour
format.
•Local Time (LC) in 24 hour format.
• E l a p s e d T i m e ( E T ) c o u n t u p t i m e r t o
maximum of 99 hours, 59 minutes.
•Elapsed Time (ETD) count down timer from
maximum 59 minutes, 59 seconds.
The clock select (C/S) switch, on the IIDS
b e z e l , i s u s e d t o s e l e c t t h e m o d e f o r
operation, GMT, LC, ET, or ETD. The clock
control (C/C) switch is used to start, stop,
and reset the ET clock, or to set the ETD
counter to the desired value.
The START TIME clock mode is displayed
on the lower right corner of the START
PAGE and is the only clock mode available
d u r i n g e n g i n e s t a r t . T h e s t a r t c l o c k
automatically begins counting up from zero
when the first engine throttle is moved for
s t a r t . T h e c o u n t e r s t o p s u p o n s t a r t e r
shutoff, resets to zero and begins counting
again when the second engine throttle is
advanced for start.
START PAGE START TIME CLOCK
CLOCK FUNCTION SOFT-KEYS
SECONDARY PAGE DISPLAY
Summary of Contents for BELL 430
Page 1: ...Product Data ...
