Copiscan 8000 Plus Series Operator Manual
www.bellhowell.imagingcomponents.com
August 25, 2000
1-800-SCAN495
49
COPISCAN 8000 # 000000”
Base String
Index String
Printing of the base string BASE (F1) and index string INDEX (F2) can be independently
enabled or disabled using the ON/OFF (F3) key. However, if both are set to OFF, the
imprinter cannot be turned ON.
When setting the start index or base string text, the LEFT and RIGHT keys are used to
position the cursor “_” and the - button and + button are used to select the desired
alphanumeric character.
1. The base string can include the following characters:
<SP>
!”#$%&’()*+,-./:;<=>?@
!
^_`{}
0..9
A..Z
2. Underline is not supported
3. Leading spaces in the message string are stripped, trailing spaces are not. This allows
a gap to be inserted between the base and index strings
4. Maximum length of the base string is 22 characters
5. Press the UP key to exit the menu.
To establish the initial index string, select INDEX (F2).
The index string is a numeric string that will automatically be incremented for each page
scanned.
1. The index string can only include the following characters:
<SP>
0..9
2. Leading spaces in the index string are stripped and used to set the number of digits
printed
3. Maximum length of index string is 10 characters
4. Index auto-increment step size is fixed at one
5. Press the UP key to exit the menu.
