54
System Configuration
Ways to Access XAdmin
• There is no compatibility problem if only the patch revision number is different
between the Kaleido Software version on the multiviewer and the XEdit version on
your PC. Click
Yes
to the Software Version Check screen.
• There is a compatibility problem if the major version, minor version, or both are
different between the Kaleido Software version on the multiviewer and the XEdit
version on your PC. The solution is to downgrade / upgrade the XEdit version used on
your PC to the Kaleido Software version used by the multiviewer. Proceed as follows:
• Click
No
to the Software Version Check screen.
• Unistall XEdit from your PC (see
• Install XEdit from the multiviewer (see
Installing XEdit from your Multiviewer’s
If you regularly connect to different multiviewer systems that use different Kaleido
Software versions, and as a result you receive the Software Version Check error message,
the best solution to avoid this is to upgrade all of your multiviewer systems to the same
Kaleido Software version.
Ways to Access XAdmin
Access the XAdmin Web client as follows:
• from a
Web browser
• from
XEdit
The first time you access XAdmin for a multiviewer (and every time the multiviewer’s
IP address has changed), you may see a security warning or a certificate error message. The
procedures below include instructions on how to address these messages (see
your Multiviewer's Security Credentials with your Browser
on page 55). Internet Explorer
users may also need to enable compatibility view (see
Enabling the Compatibility View in
Opening XAdmin from a Browser
To open XAdmin from a browser
1 Open a Web browser window and enter the multiviewer’s IP address in the address bar.
The Kaleido home page appears.
2 Click the XAdmin button.
