28
Frame Control Panel Operation and IP Network Setup
Navigating the Local Control Panel Menu
The panel is assigned to operate any card in the frame by pressing the Select button
on the
front edge of that card.
The Status LED on the selected card will then be flashing orange.
Press the CONTROLLER button on the control panel to select the controller card itself.
Navigating the Local Control Panel Menu
The KMV-3901/3911 has operating parameters which may be adjusted locally at the
controller card interface. Press the Select button
on the KMV-3901/3911 front card edge
(see
, on page 15) to assign the local control panel to operate the card. Use the
control panel buttons to navigate through the menu, as described below.
The complete menu structure is shown in Appendix 8
KMV-3901/3911 Local Control Panel
The local control panel displays a menu that can be navigated using the four buttons
located next to the display. The functionality of the buttons is as follows:
If no controls are operated for 30 seconds, the controller reverts to its normal standby
status, and the selected card’s Status LED reverts to its normal operating mode. If a
parameter was changed on the card but not submitted (SEL was not pressed) and the 30
second timeout occurs, the parameters will be confirmed as if the SEL button had been
pressed.
Local Control Panel Menu Structure
[+] and [-] Used for menu navigation and value modification.
SEL
Gives access to the next menu level. When a parameter value is shown, pressing this
button once enables modification of the value using the [+] and [-] buttons;
pressing a second time confirms the new value.
ESC
Cancels the effect of parameter value changes that have not been confirmed;
pressing ESC causes the parameter to revert to its former value.
Pressing ESC moves the user back up to the previous menu level. At the main menu,
ESC does not exit the menu system. To exit, press the Select button on the front
edge of the card being controlled.
KMV-3901/3911 user interface (local menu structure)
INPUT STATUS
1 {FORMAT}**
2 {FORMAT}**
3 {FORMAT}**
4 {FORMAT}**
5 {FORMAT}**
6 {FORMAT}**
7 {FORMAT}**
8 {FORMAT}**
{CARD VERSION}**
RESOLUTION
HEAD1
{List of resolutions;* = current}**
