Belden GRASS VALLEY KMV-3901, Installation & Service Manual

Page: 16 / 128

16
Installation
CPU Status LED
The Status LED always shows the most severe detected error status that it is configured to
display (see
Alarm Configuration Panel , on page 80), and in the table above error severity
increases from top to bottom, with green representing no error/disabled, and flashing red
the most severe error.
If the Status LED is flashing orange, it means that the card is selected for local control using
the Densité frame’s control panel, or that the card is booting up. See
Using the Densité
Frame Control Panel , on page 27 for details.
CPU Status LED
Monitors the status of the CPU operation.
Boot LED
Monitors the status of the system firmware.
Power LED
Monitors the status of the power on board the KMV-3901/3911 card.
CPU Status LED
Color
Meaning
Green OK
Red CPU kernel error
Flashing red Upgrading
Boot LED Color Meaning
Flashing green System OK ( heartbeat signal)
Steady red Beginning of start-up process (normal)
Continuous - error
Steady green
or OFF
Software not running
Power LED Color Meaning
Green OK
Red Error detected
This is a latched error and will remain displayed until the next reboot, even
if the error was a brief glitch and the supply is OK.
If the LED remains red after a restart, there is or has been a fault in the
power source.