70
System Configuration
Viewing a Multiviewer’s Status Information
Viewing a Multiviewer’s Status Information
To view the status information for a multiviewer
1 Open XAdmin. See
XAdmin’s Status and Options page appears, showing the multiviewer model, and a list
of all modules and their statuses.
Status and Options page for a Kaleido-X (4RU)
• Some heading rows may show a card type, serial number, firmware and safe mode
versions, a module status indicator, and input signal status indicators.
• You can identify which output card currently assumes the
software master
role (and
is thus assigned the multiviewer’s IP address) by looking for the word “master” next
to the card’s identifier, for example: “OUTPUT A (master)”.
• The module status indicator shows whether the card (or module) is running
normally (green) or in safe mode (red).
• The signal status indicators reveals the presence of a valid input signal at the
corresponding connector.
2 Move the pointer to an input signal status indicator to view the associated signal
format.
Card type Serial number
Version information
Input signal status
Input signal format
Status indicator
