116
Configuring a KMV-3901/3911 Cascade
Configuring Cascade Rooms
3 If your PC and the multiviewer you wish to add are on the same subnet, then you can
select the multiviewer’s IP address from the list. Otherwise type the appropriate IP
address in the box.
The multiviewer is added to the System list.
4 Repeat from
if this cascade system includes a third multiviewer.
Configuring Cascade Rooms
In a cascade room, each cascaded display is assigned heads from the other multiviewers,
configured as
layers
, by setting the display’s
Layer 2 head
and
Layer 3 head
properties to
match the actual head order in your physical configuration.
Note:
The system type is automatically adjusted based on the actual target
system.
Note:
Each member of a cluster has its own database where both common
information about the cluster and information local to the individual cluster
member are stored. Room and layout definitions are automatically
replicated to all cluster members, whereas the configuration for devices
connected to a specific system is only stored in this system’s database.
