BEGA Gateway 70 588, Installation And Start-Up Instructions Manual

Page: 10 / 52

10 Gateway 70 588
Chapter 2 | Commissioning
If possible the gateway should be installed first, before all other components. This gives you better control of
the installation progress. The following sections explain the usual procedure for the initial operation.
2.1 System requirements
Power supply:
5V DC (via included power adapter up to 100 – 240V AC).
Web browser with HTML4/5, CSS2/3 and JavaScript, e.g.:
Apple Safari, Google Chrome, Microsoft ® Internet Explorer, Mozilla Firefox®, Opera, etc.
Data link:
Ethernet 10/100 Mbit/s and IPv4 network environment (IPv6 will be supported by a future update)
2.2 Connecting the gateway
Connecting the gateway to your network
Use the included patch cable (G) to connect the gateway to your DSL, UMTS or LTE router (see figure).
Connecting the gateway to power supply
Connect the included power supply (H) to your gateway and plug it into the outlet (see figure 2). This device
may only be connected to an easily accessible outlet indoors. In case of danger pull the plug.
Note: To avoid damage to the device, use only the included original AC adapter as a power supply.