BEGA Gateway 70 588, Installation And Start-Up Instructions Manual

Page: 20 / 52

20 Gateway 70 588
Chapter 3 | Configuration
3.2 Basic settings
The basic settings are used for general configuration of your gateway:
3.2.1 Device information
Device information can be freely defined. In environments with several gateways, it helps identifying every single
device. Your defined description of the gateway can also be found, for example, in the BEGA Gateway app.
To make your individual information, follow these steps:
1. Click the “Edit” button (see figure 15).
2. Select the textbox you wish to edit.
3. Fill in your information.
4. After filling the information, click the “Save” button (see figure 16).
Figure 15
Figure 16
3.2.2 Time and date
In the “Time and date” section, the current date and time of your system is displayed. This information is important
when configuring time-dependent actions for your ZigBee network (e.g. automatic raising of blinds at a certain time).
If possible, date and time should be synchronized with an internet time server (NTP server). This configuration is set
by default. For this, the option “Synchronize date and time automatically” should be enabled (see figure 17).
A permanent internet connection, such as DSL, is required.
Figure 17