BEGA Gateway 70 588, Installation And Start-Up Instructions Manual

Page: 24 / 52

24 Gateway 70 588
Chapter 3 | Configuration
3.3.2 Proxy settings
If web access in your network is provided by a HTTP proxy server, you can enter all necessary configuration
parameters here (see figure 24). More information about the parameters can be given by your network administrator
or by “Determining the network parameters” (see section 3.7) via your PC.
In typical network environments there is usually no proxy. That means you do not need to fill the appropriate text
boxes with information.
Note: The password specified here will be encrypted and stored on the device.
Figure 24
3.3.3 Role in the ZigBee network
In contrast to the settings stated above that affect the gateway’s Ethernet interface, this setting relates to the wireless
ZigBee network. By default, the gateway creates and manages a ZigBee network as a ZigBee coordinator and trust
center. To control components in an existing ZigBee network of another manufacturer via your BEGA Gateway app,
you can also operate the gateway as a ZigBee router and join an existing network (see figure 25).
Figure 25
Note: If you use multiple gateways in your ZigBee network, you have to make sure that only one gateway is
responsible for creating and managing. Besides, only one gateway should be active as an OTA server in the
ZigBee network.