BEGA Gateway 70 588, Installation And Start-Up Instructions Manual

Page: 16 / 52

16 Gateway 70 588
Chapter 3 | Configuration
The gateway offers a web based configuration interface, which can be reached by a web browser via your PC, tablet
or smartphone. This allows you to configure all required settings concerning the gateway.
For this, enter the IP address of your ZigBee gateway in your web browser’s address line http://. After pressing the
Enter key, a confirmation request will be displayed. Here, you enter the username admin and the password (which is
admin as well, by default) (see figure 11).
Default parameters:
IP address: 192.168.0.211
User name/login: admin
Password: admin
Figure 11
If you already configured your gateway, but forgot the address, you can simply look for it in the BEGA Gateway app.
More information about how to determine the IP address of your gateway can be found in section 3.8 “Determining
gateway address”.
Note: Your PC, tablet or smartphone has to be in the same network as the gateway is, in order to configure
it. If this is not the case, more information can be found in section 3.9 “Change network parameters for
gateway access”.