Mechanical installation
74
───
Version: 2.2
XTS
Use threadlocker
Use threadlocker when fixing the guide rails to the modules of the
XTS with the screws.
If you do not use threadlocker, the guide rails can work loose in
case of unusual operating conditions such as vibration and lead
to damage to other components of the XTS.
Subsequent movement
Beckhoff recommends initially fixing all guide rails hand tight with
a screw in the center. This allows you to compensate unequal
distances later on.
2
1
3
► Use threadlocker 1 for fixing the screws in the guide rails
► Insert screw 2 into the center of the guide rail 3 and screw it in
hand tight
1
2
3
► Insert locating pins 1 and 2 into the guide rail 3
1
2
► Set guide rail 1 on the opposite side of the XTS straight down on
the locating pins 2 once again
