Mechanical installation
64
───
Version: 2.2
XTS
Insert connector card correctly
The connector card only fits into the module in one position. Insert
the connector card in accordance with the description below.
If you insert the connector card into the module the wrong way
around, the contacts on the connector card or in the module may
be damaged.
BECKHOFF
in
se
rt
th
is
sid
e
fi
rs
t
1
2
3
The lettering 1 "insert this side first" must be inserted into the mod-
ule at the position of the seal. The marking 2 then lines up with the
outer edge of the module. The lettering 3 is for orientation.
1
► Insert the seal 1
► Insert connector card 2 at the position of the seal 1
1
2
3
► Position module 1 in the slots on the machine bed 3 again and
push it carefully into the module 2
► Make sure that the connector card engages
