Product overview
Version: 2.2
───
31
XTS
3.7
Intended use
The XTS may be operated exclusively for the activities foreseen and
defined in this documentation, taking into account the prescribed en-
vironmental conditions.
The components are to be installed in electrical systems or ma-
chines and only put into operation as integrated components of the
system or machine.
All components of the XTS are intended only to be programmed and
commissioned with the help of the Beckhoff TwinCAT automation
software.
Read the entire drive system documentation:
• This translation of the original instructions
• Translation of the original instructions for the control computer
• Complete machine documentation provided by the machine
manufacturer
3.7.1
Improper use
Any use exceeding the permissible values specified in the Technical
data is considered improper and therefore prohibited.
The Standard XTS is not suitable for use in the following areas:
• in ATEX zones without a suitable housing
• in areas with aggressive environments, for example aggressive
gases or chemicals
The relevant standards and directives for EMC interference emis-
sions must be complied with in residential areas.
