For your safety
Version: 2.2
───
13
XTS
Read this chapter containing general safety information. The chap-
ters in these operating instructions also contain warning notices. Al-
ways observe the safety instructions for your own safety, the safety
of other persons and the safety of the product.
When working with control and automation products, many dangers
can result from careless or incorrect use. Work particularly thor-
oughly, not under time pressure and responsibly towards other peo-
ple.
2.1
General safety instruc-
tions
This chapter provides you with instructions on safety when handling
the product. This product is not capable of stand-alone operation
and is therefore categorized as an incomplete machine. The product
must be installed in a machine/plant by the machine manufacturer.
Read the documentation prepared by the machine manufacturer.
2.1.1
Before operation
Danger from magnetic fields
The magnetic fields of some of the components of the XTS are dan-
gerous to:
• people fitted with cardiac pacemakers
• persons with magnetically conducting implants
• implanted and external defibrillators
• magnetic data storage devices, chip cards with magnetic strips
and other electronic devices
Maintain a safety distance to all magnetic parts and prevent direct
contact between magnetic parts and parts that are sensitive to inter-
ference.
Observe the requirements of BGV B 11 for electromagnetic fields
(Germany) and applicable national regulations in other countries.
Use output voltages SELV / PELV
Operate all electronic modules and components in the drive system
only with a SELV (Safety Extra Low Voltage) or PELV (Protective
Extra Low Voltage) output voltage.
Keep the surroundings clean
Keep your workplace and the surrounding area clean. Ensure safe
working.
Secure the control cabinet
When working on machines, secure the control cabinet against inad-
vertent power-up.
