Beckhoff EP7402-0057, Manual

Page: 24 / 63

Mounting and cabling
EP7402-0057 24 Version: 1.3
3.2.3.1 Status LEDs
LED Signal Meaning
Motor CH1 off Motor channel 1 is disabled.
You can enable it by setting "Enable" to 1 in the process data object
STM Control Channel 1 [
}
13] .
green illuminated Motor channel 1 is enabled.
red illuminated Motor channel 1 has been disabled due to an error. Check the
diagnostic bits [
}
42] to determine the cause of the error.
Warning orange illuminated Warning message.
Check the diagnostic bits [
}
42] to determine the cause of the
warning message.
Motor CH2 off Motor channel 2 is disabled.
You can enable it by setting "Enable" to 1 in the process data object
STM Control Channel 2 [
}
13] .
green illuminated Motor channel 2 is enabled.
red illuminated Motor channel 2 has been disabled due to an error.
Check the diagnostic bits [
}
42] to determine the cause of the error.